If your HVAC system breaks, it might very well be the first time you have to think about your system in detail. Once you reach this point, maintenance is forgotten and expensive repairs become mandatory. Finding the right person to maintain or install an HVAC system can be complicated. You will get help with the process here.
Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. Write down the make, model, and any maintenance history. This will facilitate the process when your contractor asks for this information.
If your HVAC doesn’t seem to be working properly, check things out yourself prior to calling in a technician. Note which rooms are hot and which are cold. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.
If the condenser for your HVAC system is located outside, make sure you clear away any debris that might settle in or around it. Wind can pile up all sorts of debris against its grill. It can overheat, leading to disaster within your system.
Every spring you should clean the coils and fan blades on your condenser fan. Don’t forget to disconnect the power first. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
If trees are losing leaves around your home, this can impact your HVAC unit. Clean outdoor units often to remove leaves. The fan needs to have an unobstructed path for air to enter the unit, and if it becomes blocked, you will end up with many headaches with the unit.
You need to lubricate parts of your fan condenser. These ports are often covered by a rubber or metal cap. Pick out a SAE 20 type of oil because it has no detergent, is lightweight, and you should put around 10 drops in the ports but make it to where they don’t get too full.
When choosing the area for placing an outdoor compressor device, place it in a shady area. When your unit is bringing in cool air, it will not have to work as hard to cool the air as it moves it inside, boosting efficiency.
Your head is likely full of new information now! Put it to use on a variety of HVAC systems. If your existing system needs to be replaced or repaired, you now know what to avoid and what you should look for. Always remember these tips and they’ll continue to serve their purpose in your future.
